1. <code id="rsd4n"></code><tr id="rsd4n"></tr>
        1. 歡迎光臨濟南宏泰食品機械有限公司官方網站!

          當前位置:首頁 > 公司動態 > 宏泰集團動態 >
          發布時間:2021-09-15 14:34:28 來源:http://www.elimoye.com 發布人:admin

          The operation principle of the slicer is also very simple. It is to use the cooled drum to flake the materials that will condense and crystallize, then scrape them with a sharp blade, and then Shovel them out according to the corresponding size. In this way, it can be well used for production or corresponding activities.
          Slicers are widely used in our life, and there are many kinds of slicers. Condensing crystallization also has slicers, which use drum slicers. This slicer is mainly composed of drum, frame, blade, transmission part, casing, etc. it uses the drum to operate and play the role of a flywheel, and then shovel irregular pieces through the blade to slice quickly.
          To say the blade matched with the slicer, or what material is cut, because the blade corresponding to different substances is different from the slicer. Blade materials include: copper, stainless steel, manganese steel, tetrafluoroethylene, bakelite and steel strip. Various blades suitable for yourself are selected according to the hardness and chemical characteristics of different substances.

          The outer package of the slicer is stainless steel, so we should pay special attention not to use too sharp or hard things to touch its surface in order to avoid scratching. If it is necessary to clean the slicer products after a period of use, the staff should remove the fixed screws at the same time, so as to avoid danger or damage to the equipment when removing one screw.
          Also pay attention to the lubrication care of the slicer. Check its lubrication regularly. When adding lubricating oil, ensure that the amount of oil is sufficient, but not excessive. The staff shall clean up all residual materials inside the slicer in time after the end of each day's work. And pay attention to check the wear of the blade. If there is a problem, it should be repaired or replaced in time. In addition, clean the work site and pay attention to cutting off the total power supply of the equipment.

          上一條 : 針對什么來選擇合自己的切片機刀片?

          下一條 : 針對什么來選擇合自己的切片機刀片??