Brief introduction of dicing machine
Dicing machine refers to the machine that is suitable for processing soft food materials such as dehydrated vegetable, quick-frozen vegetable processing plant, jelly, fairy grass honey and food pickles, and for processing various root and stem vegetables into cuboids and cuboids.
切丁部件由一把切片刀，一組圓刀軸以及一組橫切刀軸組成。 替換圓刀軸、橫切刀軸以及調整切片厚度能夠完結切開不同 尺度丁的轉化。
The cutting part is made up of a slicing knife, a set of round cutter axes and a set of crosscutting cutter shafts. Replacement of circular cutter shaft, crosscutting cutter shaft and adjusting slice thickness can finish the transformation of different scales.
How to ensure safe operation of the chop machine?
Although the dicing machine is a common food processing equipment, and has the corresponding high quality advantages, but when using the machine and equipment, if you do not pay attention to the operation method, or the power supply is abnormal, then the problems and risks will occur at any time. In this regard, how can we ensure the safe operation of the machine?
In fact, to ensure the safe use of the machinery and equipment, we can pay attention from two aspects. Top of the list is the corresponding external conditions, such as power supply, the overall system of the machine and so on. If these conditions are intact, it will be conducive to the dicing operation. The second aspect is the operation status of operators, professional operation, no adverse behavior, is to ensure the normal and safe use of the machine and equipment.
Therefore, in the use of all the time, to ensure safety, that is, the above mentioned external conditions of attention and the operator's self-professional operation skills to ensure. Of course, the status of materials can not be ignored.
Check carefully whether there is any shortage, loss and loosening problem of the chop machine to ensure that the machine is in good condition.
Check whether there is any foreign body in the shell, and remove the foreign body in the shell, otherwise it will simply cause the damage of the blade.
Clean up the operation site, check whether the power supply voltage is consistent with the local operating voltage, and whether the grounding mark is firmly connected to the grounding wire.
Close the switch and press the "on" button to check whether the steering is correct (in the face of the push dial, the push dial rotates counterclockwise to the correct direction), otherwise, block the power supply adjustment wiring.
Connect the water source for use.
Operation and application of dicing machine
Above all, the cut material should be washed and removed. If the cut material is mixed with sand, stone and mud, the blade and blade are simply damaged and blunt. The maximum cutting diameter of material should not exceed 100mm. If it is larger than this diameter, it must be partitioned.
Press the start button to operate the motor. (if the upper cover is not pressed on the frame, it can not press the switch XK, the line is blocked, and the motor can not operate).
The cut material is evenly connected from the hopper into the hopper. Under the effect of the pushing dial, it is cut into the required thickness by the slicer, then cut into strips by the disc cutter, and finally cut into squares by the transverse blocking cutter.
Standard adjustment of dicing machine: It is changed by adjusting the thickness of slice, replacing disc cutter and transverse blocking cutter. Do not put your hands and other foreign objects in the shell when the machine is working, so as to avoid any risk.
The above news is organized and published by Jinan Hongtai Food Machinery Co., Ltd. For more information about the slicer, please click on our website: http://www.sdjnzlp.com.