1. <code id="rsd4n"></code><tr id="rsd4n"></tr>
        1. 歡迎光臨濟南宏泰食品機械有限公司官方網站!

          全國咨詢熱線
          當前位置:首頁 > 公司動態 > 業內資訊 >
          切骨機的運行原理你知道是什么嗎?
          發布時間:2019-02-11 16:33:12 來源:http://www.elimoye.com 發布人:admin

          切骨機完全是模擬刀切的原理,由電機帶動切刀上下運動,剁切骨頭時不會產生肉沫,一把切刀用幾年也不會損壞,加工骨頭成本低。切骨機采用人工刀切骨頭作業原理,切骨刀由上至下反復運動,會將骨頭切開,一分種能夠到達60次,一小時能夠切200-300公斤。
          Bone cutting machine is a complete simulation of the principle of knife cutting. The motor drives the knife to move up and down. When cutting bone, it will not produce meat foam. A knife will not be damaged for several years, and the cost of processing bone is low. The bone cutting machine adopts the principle of artificial knife to cut bones. The bone cutting knife moves repeatedly from top to bottom. It can cut bones 60 times per minute and 200-300 kilograms per hour.
          剁切骨頭是個體力活,而且人工剁骨頭功率較低,又容易發生風險,而切骨機的應用解決了這一難題,不光能夠高 功率的剁骨頭,而且操作簡單安 全,完全能夠滿足用戶的需求。沒有鋸屑,不會產生浪費,大程度降低了用戶的生產成本,進步 功率與收益,能夠說是現在抱負剁骨頭的設備。
          The application of bone cutting machine solves this problem. It can not only cut bone with high power, but also operate simply and safely. It can fully meet the needs of users. Without sawdust, there will be no waste, greatly reducing the production costs of users, improving power and revenue, can be said to be the aspiration of the current bone-cutting equipment.
          切骨機的裝置方法:
          The device method of the bone cutting machine is as follows:
          操作前將設備放置在水平地上,保證機器放置平穩牢靠;斷定設備插頭觸摸良好,無松動,無水跡;
          Place the equipment on the horizontal ground before operation to ensure that the machine is stable and reliable; conclude that the plug of the equipment has good touch, no loosening, no water trace;


          檢查旋轉料筒內或運送帶上是否有異物,如有異物必 須整理潔凈,以免引起刀具損壞;
          Check whether there are foreign bodies in the rotating barrel or on the conveyor belt. If there are foreign bodies, they must be cleaned up to avoid tool damage.
          操作、調整依據所需加工的菜類選擇切割模式,離心切片機用于瓜薯類硬菜的切片,豎刀部分可將葉類軟菜或切好的片加工成不同規格的塊、丁、菱形等各種形狀;
          Operate and adjust the cutting mode according to the processed vegetables. The centrifugal slicer is used to slice the hard vegetable of melon and potato. The vertical knife part can process the soft vegetable of leaves or sliced pieces into different shapes such as blocks, dices, diamonds and so on.
          裝置豎刀,先轉動可調偏心輪,使刀架行至下死點后,再使刀架向上抬起1-2毫米,使豎刀與運送帶觸摸后,緊固螺母把豎刀緊固在刀架上。如果刀架抬起高度小,蔬菜有或許連刀,如果刀架抬起高度過大,有或許切壞運送帶。
          The vertical knife is installed. The adjustable eccentric wheel is rotated to make the tool holder move to the bottom dead point, then the tool holder is lifted up by 1-2 mm. After touching the vertical knife and the conveying belt, the vertical knife is fastened to the tool holder by the fastening nut. If the lifting height of the knife holder is small, vegetables may be even knifed. If the lifting height of the knife holder is too high, it may cut the conveyor belt.
          以上信息是我們切丁切塊機整理發布希望對大家有所幫助我們的網站是:http://www.elimoye.com!
          The above information is our cutting machine collation and publication hope to help you with our website is: http://www.elimoye.com!

          上一條 : 你知道什么是切丁機嗎?

          下一條 : 果蔬切片機的使用注意事項!

          相關新聞

          曹經理
          李經理
          袁經理
          4009909668
          AV天堂亚洲国产AV,精品国产免费无码久久,西西大胆午夜人体视频,午夜片无码AB区在线播放APP